Auto Refkeratometer RC-5000

Highly accurate measurement combined with short examination time and ease of use makes working with the RC-5000 both professional and quick. The advanced touch-screen display allows you to perform both refraction and keratometry automatically with one simple movement, Capture one eye on the display and the RC-5000 will do both eyes automatically. With the new features, the RC-5000 will surely make your office more efficient.

Refractometry 

                        -Normal Mode: 
                        -Fogging is applied automatically for each measurement for more accuarte results.     

·        Quick Mode

-Quick Mode:

Fogging is applied as needed for consecutive measurements

·        IOL/CAT Mode:

This mode is used to measure cataract or pseudophakic eyes.

 Keratometry

-Short consecutive measurements and time provide reliable data.

-Measurements at 6.00mm (R=8.0mm) as well as at 3.00mm give you enough information for contact lens fitting.

-base curves of contact lenses are stored, categorized and suggested manufacturers are automatically printed.

Diameter Measurements of Cornea and Pupil

-Measurement can be done easily by moving the two cursors on the display to the boundary of cornea or pupil. This is useful for deciding the diameter of a contact lens and for other contact lens  fitting practice.

Power Joystick

-Move the joystick ring up/down and the instrument head moves up/down quickly.

-Move the joystick hand rest to the right/left or backward/forward and the instrument head moves to the right/left or backward/forward quickly.

-Rotate the joystick ring and the instrument head moves up/down slowly.

-Tilt the joystick and the instrument head moves in each direction slowly.

Power Chinrest

-The chin rest can be moved by pushing the buttons on the front panel. No need to reach out to the chin rest for manual adjustments.

SPECIFICATIONS

Measurement Ranges

            Refractometory

                        Sphere                            -25.00 to +22.00D (VD =12.00mm)

                        Cylinder                         -10.00 to +10.00D (VD = 12.00mm)

                        Axis                                 0 to 180 Degree

                        Minimum Pupil Dia.       2.2mm

                        Measurements Time       0.2 Sec.

             Keratometory

                        Range                             5.00mm to 11.00mm

                        Corneal Refraction            30.68D to 67.50D (n = 1.3375)   

                        Corneal Astigmatism        0D to 10D (n = 1.3375)

                        Axis                                0 to 180 Degree

                        Measured Area                 3.0mm / 6.0 mm

                        Measured Time                 0.1 Sec

PD Measurement                                    Yes (50 to 86mm)

Diameter Measuremnt of Cornea & pupil      1.0 to 14.0mm

Chinrest                                                          Power Chin Rest

Printer                                                            High Speed Thermal Line Printer

Output Port                                                     RS-232C

Power Requirements                                        AC 100V to 240V

                                                                      50/60Hz

                                                                      130VA

  Size

            Height                                                  466mm or 18 inches

            Width                                                   300mm or 12 inches

            Depth                                                   493mm or 19 inches 

 Weight                                                             Weight 19Kg or 42 pounds